Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Norfolk, VA
If your driveway gate has stopped opening, is dragging on a hinge, or needs replacing outright, a gate company in Norfolk has to understand water, salt, and old brick before it understands anything else. Norfolk sits on tidal tributaries off the Chesapeake Bay, where year-round salt breezes and storm-surge flooding eat at steel hinges and swell wooden posts in ways inland Virginia cities simply don’t see. That’s the first thing we ask about on a Norfolk job. We handle gate installation, gate repair, and electric gate repair across the city, and our technicians have up to 9 years of experience on the systems Norfolk homes and businesses actually run. Call (855) 686-7069 for a free estimate.
Why Norfolk Homes Are Different
Norfolk is a waterfront city built on tidal ground, and that shows up in the gates. Neighborhoods like Larchmont and the Hague sit on tidal tributaries where salt air and storm-surge flooding corrode steel hardware and warp wooden frames. We see hinges that rust from the inside out, posts that rot at the soil line, and operator boxes that take on water during a nor’easter. A gate that would last a decade inland often needs attention sooner here.
Housing stock matters too. Much of Norfolk’s housing is 1920s to 1950s brick and wood-frame homes with original wrought-iron or wooden driveway gates. In Ghent and Colonial Place, plenty of those older homes have narrow, historic carriage-style driveway gates that have to be repaired in place without widening the opening. Matching original hardware usually means custom-fabricated replacement parts rather than anything off a shelf. Newer subdivisions like East Beach bring a different job entirely: vinyl and aluminum privacy fences with modern automatic operators.
The climate does the rest. Norfolk’s humid subtropical weather keeps rust moving on metal all year, and tidal flooding during nor’easters and hurricanes speeds it up. When we look at a Norfolk gate, we’re looking for the water damage first, not just the broken part.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Norfolk Services
Most Norfolk calls come down to two jobs: a gate that’s broken, or a gate that’s electric and has stopped responding. Here’s what each involves here.
Gate Repair in Norfolk
Mechanical gate repair in Norfolk usually means hinges, posts, latches, and panel alignment. Salt air off the Chesapeake is the culprit more often than not. Hinges seize, post bases soften, and a gate that was square last spring now drags on the ground. In older neighborhoods, carriage-style gates often can’t be widened to fix a sag, so we work with the original opening and fabricate hardware to match. We check the footing and the frame before we touch the hinge, because replacing a hinge on a rotting post just buys you a few months. If you need gate repair in Norfolk, the visit starts with a look at what the salt and water have actually done.

Electric Gate Repair in Norfolk
Electric gate repair is a different diagnostic job. When an automated gate stops opening, the panel is often fine and the problem sits in the motor, the control board, a loop detector, or the intercom wiring. Norfolk’s damp air and salt spray push hard on operator enclosures, and a control board that’s taken on moisture can act erratically before it fails outright. We work on LiftMaster and FAAC systems regularly and we diagnose the system rather than guessing at the symptom. That means testing the operator, the safety edges, and the power run before recommending a part. For electric gate repair in Norfolk, call and describe what the gate is doing.

Gate Installation in Norfolk
Gate installation in Norfolk starts with the ground and the weather, not the catalog. A gate set into tidal soil near the Hague or in Larchmont faces salt air and storm-surge flooding that will find every weak point in the hardware, so we spec marine-grade fasteners, treated posts set to proper footing depth, and operators with enclosures that can take the damp. In Ghent and Colonial Place, installation often means fitting a new gate into a narrow historic opening on a 1920s lot, which is a measuring job before it’s a building job. Whether you’re replacing a rusted-out wrought-iron gate or adding an automatic driveway gate to a newer East Beach property, the plan is the same: measure on site, order the right parts, and schedule the work. We handle everything from Gate Installation to the wiring and safety edges, and the price is quoted and agreed before any work starts.
Automatic Gate Installation
Adding an operator turns a manual gate into an automated one, and in Norfolk the operator has to survive salt air and wet winters. We size the operator to the gate’s weight and swing, run the power, and set the safety edges and loop detector.
Signs you need it
You’re tired of getting out of the car every time, or the gate is too heavy to swing by hand comfortably.
What it costs in Norfolk
Automatic gate installation in Norfolk typically runs $2,200 to $6,500 depending on the operator and whether power has to be run to the gate.
How we do it
We measure the gate and opening, confirm the power source, select an operator suited to the gate’s weight, then mount the operator, wire the controls and safety edges, and test the full cycle.
Electric Gate Installation
An electric gate installation is the full package: gate, operator, power run, and controls. Norfolk’s flood-prone ground means we look hard at where the operator housing sits relative to tide and storm water before we commit to a layout.
Signs you need it
You’re installing a new gate from scratch and want it powered and controlled from the start.
What it costs in Norfolk
Full electric gate installation in Norfolk typically falls between $3,500 and $9,000 depending on gate style, operator brand, and how far the power has to travel.
How we do it
We lay out the gate and operator positions, set the posts to proper footing depth, install the gate and operator, run the power and low-voltage controls, and commission the system with the safety devices tested.
What Gate Installation Costs in Norfolk
| Item | Typical range in Norfolk |
|---|---|
| Automatic gate installation (operator added to an existing gate) | $2,200 – $6,500 |
| Electric gate installation (gate, operator, power run, controls) | $3,500 – $9,000 |
| Driveway gate installation (gate and posts, manual or ready for an operator) | $1,800 – $5,500 |
Can you install a gate in a narrow historic opening in Ghent?
Yes. Older Norfolk lots in Ghent and Colonial Place often have tight carriage-style openings, so we measure the existing gap and build the gate to fit without widening it. Custom hardware is common on these jobs.
Do you handle the power run and the safety edges?
We do. An electric gate installation includes running power to the operator, wiring the controls and safety edges, and testing the full cycle before we call the job done. The price is quoted first.
Brands We Service in Norfolk
We work on nine gate automation brands, including Mighty Mule, LiftMaster, FAAC, and BFT, and brand familiarity means accurate parts sourcing and a faster resolution than a generalist guess. We don’t stock parts locally, so the timeline depends on the part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Norfolk, VA
| Service | Typical range in Norfolk |
|---|---|
| Gate hinge and hardware repair | $150 – $450 |
| Gate post repair or replacement | $250 – $900 |
| Gate panel realignment | $150 – $500 |
| Electric gate motor repair | $300 – $1,200 |
| Control board replacement | $250 – $800 |
| Loop detector repair or replacement | $200 – $650 |
| Intercom and entry system repair | $200 – $700 |
| Automatic gate installation | $2,200 – $6,500 |
| Electric gate installation | $3,500 – $9,000 |
| Driveway gate installation | $1,800 – $5,500 |
In Norfolk, two things push the price up more than anything: water damage found underneath the visible problem, and custom-fabricated hardware for a historic opening in Ghent or Colonial Place. Whatever the job turns out to be, the price is quoted and agreed before any work starts, and the written estimate sets the final number.
Neighborhoods We Serve in Norfolk
We work across Norfolk, from the tidal waterfront neighborhoods to the newer subdivisions. Salt corrosion and flood damage look different in each part of the city, and we adjust the approach to match. Response across Norfolk is generally fast, and we’ll confirm scheduling when you call.
- Larchmont
- The Hague
- Ghent
- Colonial Place
- East Beach
Service Area – Cities Near Norfolk
Norfolk sits in the middle of Hampton Roads, and we cover the surrounding cities as well. If you’re just outside the Norfolk line, we can help in Chesapeake, VA, Hampton, VA, Virginia Beach, VA, and Newport News, VA. Each has its own gate quirks, and the same salt air and tidal ground that shape Norfolk work show up across the water too. Call and we’ll confirm coverage for your address and set up a free estimate.
Serving Norfolk, VA – Our Local Coverage Area
We serve Norfolk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Norfolk
Usually same day for repair calls in Norfolk, and we confirm a window when you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (855) 686-7069 for the soonest opening.
A new gate, especially one tied to a fence line or an electric operator, usually needs a permit. Check with the City of Norfolk’s building department before work starts, and ask about any HOA rules in your neighborhood as well.
Yes, we cover Norfolk from Larchmont and the Hague across to East Beach, plus the surrounding Hampton Roads cities. If you’re unsure whether your address falls in the area, call and we’ll confirm quickly.
Ready to get your Norfolk gate working again or install a new one? Call (855) 686-7069 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Norfolk Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Michelle Fletcher"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Emily Novak"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Jennifer Ackerman