Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Mathews
If your gate has stopped swinging true, seized at the hinge, or come down in the last storm, we can help. We handle gate repair throughout Mathews, from gravel lanes off Route 198 to the shell driveways along the East River, and we know this peninsula’s gates don’t fail the way inland gates do. Salt air, saturated ground, and heavy summer humidity do the damage here. Call (855) 686-7069 and describe what your gate is doing. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Mathews Homeowners Call Gate Repair Hampton for Gate Repair
We work on the gate systems people in this county actually own: wooden farm gates, tube gates, hand-built driveway entrances, and the automated operators hanging off them. Our technicians have up to 9 years of experience, and they’re trained across nine major gate automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule. That matters on a peninsula where a driveway gate might be a box store kit at one property and a commercial-grade opener at the next.
We diagnose the system, not just the symptom. A gate that won’t open is sometimes a dead motor, sometimes a misaligned loop detector, sometimes a control board that took a moisture hit, and sometimes a hinge post that has heaved enough to bind the whole panel. We find which one you have before we quote anything.
Because Mathews is rural and water-bound, one call to our team covers the whole job: repair, electric gate diagnostics, and new installation. No handoffs to another contractor halfway through. The price is written and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Mathews
Driveway Gate Repair in Mathews is usually a mobile call-out to a farm gate or owner-built entrance, not a factory system under a service contract. A typical driveway gate job here runs $250 to $850 for hinge replacement, post work, and realignment, and an electric gate repair with operator or control board work generally lands between $300 and $1,100, with the written estimate setting the final price. What drives the cost is how far the footing has moved and how much corrosion we find at the welds.
Post and Hinge Work
When a hinge post pulls loose, resetting it correctly means re-pouring the footing, not just driving new bolts into soft ground. We set posts for the sandy, shrink-swell soils along the county’s gravel lanes so the gate doesn’t simply sag again within a season. After that we replace the hinges and fixings with corrosion-resistant hardware.
Realignment and Latch Repair
A gate that drags or won’t latch is usually telling you the post moved or the frame racked. We check the swing against the post line first, because tightening a latch on a sagging gate only lasts a few weeks. Once the panel is true, we set the latch and the stops so the gate closes cleanly.
Gate Welding in Mathews
Gate Welding in Mathews means repairing rusted seams and cracks on steel tube gates before the joint fails completely, and it’s the most common structural fix on this peninsula. Salt-laden air attacks tube-gate welds faster than inland conditions ever will, so joints crack from the inside of the seam where you can’t see it. Typical weld and rust repair runs $150 to $450 per gate, depending on how many joints need cutting out and how much steel has to be replaced. Our technicians have up to 9 years of experience with this kind of work.
Rust Treatment and Seam Repair
Grinding back rust and re-welding a cracked seam is only half the job. We treat the joint and coat it properly afterward so the same spot doesn’t fail the next time the humidity climbs. Stainless or galvanised hardware on those repairs buys extra years on the coast.
Custom Bracket and Mount Fabrication
When a gate operator mount has corroded through or been bent out of square, it usually needs to be fabricated, not ordered. We fabricate brackets to fit the existing frame so the operator sits true again without replacing sound components.

Trusted Brands We Service in Mathews
We service gate automation from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t stock parts locally, so we won’t claim same-day parts. What we do offer is brand-specific knowledge that means accurate sourcing on the first call, far less guesswork than a general handyman brings to a control board or a loop detector, and a turnaround that reflects knowing exactly which part is actually failing. If a shop told you they don’t work on your brand, call us and we’ll tell you straight whether we can help.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Mathews Homes
- Seized or cracked hinge pins and welds. Salt air corrodes hinge pins and tube-gate welds faster than inland, so gates seize or crack at the joints well before the panel itself fails. That’s why a gate that “still looks fine” can suddenly refuse to swing.
- Heaved hinge post footings after storms. Sandy, shrink-swell soils along the county’s gravel lanes heave and pull hinge posts loose after a nor’easter, leaving gates dragging or knocked off completely. Re-pouring the footing is almost always the fix, not tightening the hinges.
- Swollen, rotted wooden farm gates. Heavy summer humidity swells and rots owner-built wooden gates at the stiles and hinge mounts, so an old wooden gate can stop latching or swinging straight. Replacing rot at the stiles is the reliable cure.
- Moisture-damaged operator and control boards. Coastal humidity works on the electronics too, especially at control boards and intercoms on older installations. A board that fails intermittently after wet weather is worth diagnosing properly before replacing anything.
Pricing for Gate Repair in Mathews, VA
Our estimates are free, and the price is set per job by the written estimate, agreed before any work starts. For budgeting in Mathews: hinge, latch, and realignment work typically runs $250 to $850. Gate welding and rust repair usually runs $150 to $450 per gate. Electric gate repair, including operator and control board diagnostics, generally falls between $300 and $1,100. A re-poured hinge post footing adds to the repair when the ground has moved. Anything beyond that, like a new installation, gets its own written price after we measure. What pushes a Mathews job toward the top of a range is usually corrosion deeper than the surface shows.
We Also Serve Cities Near Mathews
If you’re outside the county line, the same crew covers gate repair in Gloucester Courthouse, Cheriton, and Williamsburg, plus gate work around Newport News. We work on Mathews and the surrounding peninsula, so wherever you sit along the coast, one call gets you a diagnosis. Call (855) 686-7069.
Serving Mathews, VA – Our Local Coverage Area
We serve Mathews and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mathews
Salt-laden coastal air corrodes hinge pins far faster than inland conditions, and it works into every joint on the gate. That’s the single biggest reason working hardware here seizes within a few seasons. The fix is stainless or properly galvanised fixings, kept moving with occasional lubrication. Call (855) 686-7069 for a free estimate on a hinge replacement.
The hinge post footing has usually moved, not the hinges. Sandy, shrink-swell coastal soil heaves after wet weather, and tightening the bolts on a post that’s no longer plumb only holds for a few weeks. The lasting repair is resetting and re-pouring the footing, then correcting the swing so the gate doesn’t simply sag again. Call (855) 686-7069 and we’ll quote the post and hinge work.
Yes, in most cases. A tube gate knocked off its hinges usually needs new hinge hardware and a reset post footing, and the welds at the hinge mounts get checked at the same time. Repair is usually cheaper than a replacement panel. Call (855) 686-7069 for a free estimate.
Yes, especially at the control board and intercom. Moisture and salt air are the two things that shorten an operator’s life on the coast, and a sealed control enclosure plus clean connections makes a real difference. We diagnose the operator first, so you don’t replace a motor that’s fine. Call (855) 686-7069 for a free estimate on the repair.
In most Mathews cases, yes. Painted steel pits and rusts through at the welds within a few years of salt exposure, while galvanised steel takes far more before it needs repair. It’s worth pricing the switch against repeat weld repairs. Call (855) 686-7069 for a free estimate and a written quote.
Ready to get your gate working again? Call (855) 686-7069 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Tell us what your gate is doing, and we’ll get a technician out to look at it. Our technicians have up to 9 years of experience with the gate systems and brands this county actually uses.
Written by the team at Gate Repair Hampton.