Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hampton, VA
If your driveway gate has stopped opening, or you’re planning a new one, a Hampton gate company should first understand the ground it stands on. Hampton’s coastal Peninsula climate and its mix of 1920s bungalows and 1950s-70s brick ranchers mean gates here fight salt air, wet winters, and clay soil that shifts posts out of plumb. We work on manual and automated systems, both residential and light commercial, and we handle repair, electric diagnostics, and new installation under one company. Call (855) 686-7069 for a free estimate.
Why Hampton Homes Are Different
Hampton sits on the tidal Peninsula where neighborhoods like Phoebus and Wythe meet the water, and that geography changes the way a gate ages. On the water side of the city, salt-laden air attacks steel hinges and galvanized hardware until they seize with rust and white salt bloom, often within just a few years. Inland, the shrink-swell clay under older subdivisions heaves wooden posts out of plumb, so a gate that swung cleanly last spring drags or binds by summer.
The housing stock pushes the same way. Phoebus and downtown Hampton hold 1920s-40s bungalows and cottages with fence-and-gate setups that are often original or near it. East-side and Buckroe properties run to 1950s-70s brick ranchers and split-levels, with newer subdivisions near Coliseum Central adding modern driveway gates. Wet winters and storm-season wind events work on all of them. That combination of maritime climate and post-war Peninsula housing is why stainless hardware and deeper post footings are the local standard here, not an upgrade. No inland city has quite this mix.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Hampton Services
Most Hampton calls come down to two things: a gate that has stopped working, or an electric system that has started behaving erratically. Here’s what each involves.
Gate Repair in Hampton
Manual and automated gates both come to us with the same physical failures: sagging wood posts, rusted steel hinge hardware, panels that have dropped and drag the ground, or slide gates that have jumped their track. In Hampton’s coastal districts we see galvanized and steel hinges seized with salt corrosion, and inland we see posts lifted by clay movement. We fix the hardware and the alignment, then check that the gate swings or slides cleanly before we call it done. For mechanical work on residential and commercial gates, see Gate Repair in Hampton.

Electric Gate Repair in Hampton
When an automated gate stops, stutters, opens halfway, or reverses for no reason, the problem is usually in the operator, the control board, a loop detector, or the intercom wiring rather than the gate itself. We diagnose the electrical side properly instead of guessing at parts. Hampton humidity and salt air get into enclosures and terminals, and that shows up as intermittent faults that a general handyman can’t trace. For motor, control, and access-system diagnostics, see Electric Gate Repair in Hampton.

Gate Installation in Hampton
New gate installation in Hampton has to account for two things a gate elsewhere may not: salt air on the water side of the city, and clay soil that moves with the seasons. A gate installed the same way it would be in an inland town will corrode faster here and drift out of alignment sooner. We handle the full Gate Installation from measure and layout through the operator, so there’s one company on the job from start to finish. That matters whether you’re replacing an old wooden gate in Phoebus or putting an automated entrance on a commercial lot near Coliseum Central. We measure first, quote in writing, and only then schedule the work.
Automatic Gate Installation
An automatic gate installation combines the physical gate with an operator, controls, and safety devices. The gate has to be right before the automation can be.
Signs you need it
You’re tired of getting out to open a manual gate, you want controlled access for a driveway or lot, or your existing operator has failed and the gate itself is sound.
What it costs in Hampton
Automatic gate installation typically runs from $2,500 to $7,500 installed, and the written estimate sets the final price.
How we do it
We measure the opening and confirm the swing or slide direction, set the posts to proper footing depth, hang and align the gate, then mount the operator and set the limits, safety edges, and controls before testing the full cycle.
Electric Gate Installation
Electric gate installation is the power and control side: running power to the operator, wiring the controls, and setting up the safety devices that stop the gate if something is in the way.
Signs you need it
You have a gate in place but no power at it, or your old electric setup has failed and needs a fresh operator and controls.
What it costs in Hampton
Electric gate installation typically runs from $2,000 to $6,500 installed, with the written estimate setting the final price.
How we do it
We confirm the power source and route, mount and wire the operator, install the safety edges and any loop detectors, then program the controls and test every stop and reverse condition before we hand it over.
What Gate Installation Costs in Hampton
These are typical ranges. Every property measures differently, so the written estimate is what counts.
| Item | Typical range in Hampton |
|---|---|
| Manual driveway gate installation | $1,200 – $3,800 |
| Electric gate installation | $2,000 – $6,500 |
| Automatic gate installation | $2,500 – $7,500 |
Do I need a permit to install a gate in Hampton?
That depends on the gate and the property. Most cities require a permit when a gate or its posts sit in a setback or near a right-of-way, so ask Hampton’s building department before work starts. We’ll tell you what we know about your setup and the written estimate is free.
Which gate brands can you install in Hampton?
We install and set up operators from the brands we know best, including LiftMaster, FAAC, BFT, and Mighty Mule, and we match the operator to your gate’s weight, opening, and power source. Call (855) 686-7069 and we’ll talk through what fits your property before anything is ordered.
Brands We Service in Hampton
We’re trained and experienced on nine gate automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering everything from DIY residential openers to heavy access systems. Brand-specific knowledge means accurate parts sourcing and a faster resolution than a general handyman can offer. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hampton, VA
Every price below is typical, not fixed. The written estimate sets the final number, and it’s agreed before any work starts.
| Service | Typical range in Hampton |
|---|---|
| Gate repair (hinges, posts, alignment) | $150 – $650 |
| Slide gate track realignment | $200 – $750 |
| Electric gate motor replacement | $500 – $1,800 |
| Control board replacement | $300 – $900 |
| Loop detector repair or replacement | $250 – $700 |
| Intercom and access control repair | $200 – $850 |
| Manual driveway gate installation | $1,200 – $3,800 |
| Electric gate installation | $2,000 – $6,500 |
| Automatic gate installation | $2,500 – $7,500 |
In Hampton, price climbs when salt corrosion has seized hardware that has to be cut out, when posts need resetting deeper into clay, or when a commercial entrance needs more than one access point wired in. Whatever the job, we quote it in writing and agree it with you before a technician starts.
Neighborhoods We Serve in Hampton
We cover Hampton from the water out. Coastal neighborhoods and the older districts off the Chesapeake tend to bring rusted hinges and salt-corrosion calls, while inland subdivisions bring post and alignment work. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, so a gate problem gets a real appointment rather than a vague promise.
- Phoebus
- Wythe
- Buckroe
- Coliseum Central
- Downtown Hampton
Service Area – Cities Near Hampton
Hampton sits in the middle of a busy stretch of the Peninsula and the Southside, and we work across the surrounding cities on the same basis. If you’re just outside Hampton, we can still help. We cover Newport News, VA, Norfolk, VA, Chesapeake, VA, and Virginia Beach, VA. Wherever you are in that group, the process is the same: we diagnose the system, quote in writing, and do the work.
Serving Hampton, VA – Our Local Coverage Area
We serve Hampton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hampton
Yes. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Repair work can often be handled same-day depending on the fault. Call (855) 686-7069 for a free estimate.
We’ll talk through what your setup likely needs, but permits and HOA approval are the property owner’s to secure. Most cities require a permit when a gate sits in a setback or near a right-of-way, so ask Hampton’s building department and check your HOA rules before work starts.
Yes. We work across Hampton, from Phoebus and Wythe to Buckroe and Coliseum Central, and into nearby cities on the Peninsula and Southside. For a job outside Hampton, call and we’ll confirm coverage and set a visit. Estimates are free.
Whether you need a failed motor diagnosed, rusted hinges replaced, or a new automated entrance measured and installed, we’ll give you a straight answer and a written price before anything starts. Call (855) 686-7069 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and our technicians have up to 9 years of experience.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Hampton Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Michelle Fletcher"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Emily Novak"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Jennifer Ackerman